 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
NASA Approves New Design For Shuttle External Tank Fitting
Huntsville AL (SPX) Jul 27, 2004 NASA is moving ahead with plans to redesign a part of the Space Shuttle external fuel tank that investigators believe played a critical role in the Space Shuttle Columbia accident. The Space Shuttle program will soon begin manufacturing and installing an improved bipod fitting, which connects the external fuel tank to the Shuttle during launch. A Critical Design Review Board of NASA managers, engineers and aerospace contractors last month approved the new design, a significant milestone in the effort to return the Shuttle to safe flight. The approval allows workers to begin incorporating the new fitting on External Tank No. 120, the tank slated for flight on the next Shuttle mission, designated STS-114. Investigators believe that during Columbia's launch in January 2003, insulating foam from the bipod area fell off the external tank and damaged the left wing of the Space Shuttle. The new design addresses the Columbia Accident Investigation Board recommendation to reduce the risk to the Shuttle from falling debris during liftoff. It eliminates the foam covering from the bipod fitting and replaces it with four rod-shaped heaters. The heaters will serve the same primary function as the foam, preventing ice buildup on the tank's bipod fittings. "This is a fix that really gets to the root of the technical problems that caused the loss of Columbia," said Michael Kostelnik, NASA's Deputy Associate Administrator for International Space Station and Space Shuttle Programs. "By eliminating this debris source, as well as potential debris from other areas, we are making the Shuttle a safer spacecraft." The External Tank Project Office at NASA's Marshall Space Flight Center, Huntsville, Ala., first began developing redesign concepts for the bipod fitting after insulating foam from the left bipod ramp area detached during the October 2002 launch of Space Shuttle Atlantis. The newly designed heaters will be placed below the fitting, in covers made of a strong alloy composed of nickel, chromium and iron. They will sit on top of a copper plate sandwiched between the fitting and a hard, dense material that separates the heater from the tank. The design will be retrofitted on the 11 existing tanks and incorporated into the manufacture of all new tanks. Lockheed Martin Space Systems will do the work at NASA's Michoud Assembly Facility in New Orleans. Delivery of the retrofitted tanks to NASA's Kennedy Space Center, Florida, is expected in October. Community Email This Article Comment On This Article Related Links NASA's Return to Flight SpaceDaily Search SpaceDaily Subscribe To SpaceDaily Express Space Shuttle News at Space-Travel.Com
Stennis Fires Up SMEs As Shuttle RTF Gathers Steam
Stennis Space Center MS (SPX) Jul 21, 2004On July 16, engineers at NASA's Stennis Space Center in Mississippi successfully tested one of the Main Engines that will carry the next Space Shuttle into orbit. The engine will be shipped to NASA's Kennedy Space Center in Florida for installation on Space Shuttle Discovery, the next Shuttle slated for flight. The Return to Flight mission, designated STS-114, will launch no earlier than next March to the International Space Station. |
|
|
| The content herein, unless otherwise known to be public domain, are Copyright 1995-2006 - SpaceDaily.AFP and UPI Wire Stories are copyright Agence France-Presse and United Press International. ESA PortalReports are copyright European Space Agency. All NASA sourced material is public domain. Additionalcopyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement,agreement or approval of any opinions, statements or information provided by SpaceDaily on any Web page published or hosted by SpaceDaily. Privacy Statement |
