![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]()
Tokyo (SPX) Mar 07, 2005 Fujitsu and Fujitsu Laboratories announced last Friday the development of the world's first semiconductor optical amplifier enabling waveform re-shaping of high-speed optical signals at 40Gbps by using quantum dots. Optical technology capable of restoring degradation of optical signals to their original quality without converting them into electronic signals is known as all-optical 3R regeneration, consisting of re-amplification, re-shaping, and re-timing. The new SOA accomplishes both re-amplification and re-shaping of optical signals through a single semiconductor device, thereby enabling optical regenerators to become further compact and facilitating higher functionality of future optical networks. New technology developed for this SOA will be the foundation for the realization of future ultra high-speed photonic networks. Research for this technology was partially conducted as part of the project "R&D of High Performance Network Subsystems Using Nano Technology", commissioned by the Ministry of Internal Affairs and Communications (MIC) of Japan. Details of this development will be presented at the Optical Fiber Communication Conference (OFC) 2005, which starts March 6 in Anaheim, U.S.
Background For future photonic networks that require high-speed optical signals to be transmitted at high qualities over long distances and flexible interconnect of optical network nodes, all-optical 3R regeneration is extremely effective. Optical 3R regeneration technology consists of three key processes: re-shaping, re-timing, and re-amplification. Re-shaping refers to the suppression of noise and fluctuation of optical signals to re-shape signal waveforms, re-timing reduces timing fluctuations know as timing jitter, and re-amplification amplifies optical signals. In the past, as optical signals were regenerated by converting them into electronic signals and using electronic circuits for regeneration, optical regeneration required large and complex regenerators. Therefore, various research has been underway to develop all-optical regenerators capable of regenerating optical signals without requiring their conversion into electronic signals.
Technological Challenges SOAs can suppress noise and fluctuation when optical signals are on (ON-level), by utilizing a characteristic known as gain saturation, in which the optical gain (amplification rate) falls when a signal is too intense. H However, conventional SOAs typically had slow gain saturation response speeds requiring several nanoseconds, thereby impacting the subsequent signal and making such SOAs unusable in all-optical regenerators.
Newly Developed Technology Technology that Fujitsu developed for its new SOA significantly accelerates the response speed of gain saturation. Fujitsu achieved this by observing and focusing on the extremely fast speeds of gain saturation when quantum dots were used. By employing quantum dots, gain saturation response time was accelerated to a few picoseconds, one-thousandth the time that was required with conventional SOAs. In addition, through improvements in crystal growth technology of quantum dots(4) and by designing a new device structure, Fujitsu realized a quantum dot SOA which easily enables gain saturation while achieving high optical gain and high optical output, at wavelengths of 1550 nanometers (nm) which are used in optical telecommunication
Results By using its new SOA, Fujitsu achieved the world's first successful waveform re-shaping and suppression of fluctuations of high-speed optical signals at 40Gbps. Unlike conventional SOAs in which waveform degradation occurred due to slow response time, such waveform degradation is not observed with Fujitsu's new SOA that employs quantum dots. By intentionally adding noise to the input signal, Fujitsu also succeeded in significantly suppressing output signal noise. When the input signal was amplified by 30 times (15 decibels), the noise to signal ratio was reduced by 40%.
Future Developments Fujitsu will further optimize this new SOA and continue with development of a function to suppress fluctuations when signals are off (OFF-level fluctuations), and a re-timing function. Fujitsu targets the realization of an all-optical 3R regenerator using practical technology in the next four or five years. Fujitsu will also hereafter consider employing its new SOA for wavelength division multiplexing (WDM) applications. Community Email This Article Comment On This Article Related Links Fujitsu Fujitsu Laboratories SpaceDaily Search SpaceDaily Subscribe To SpaceDaily Express Nano Technology News From SpaceMart.com Computer Chip Architecture, Technology and Manufacture
![]() ![]() University of Delaware researchers are opening a new front in the war on cancer, bringing to bear new nanotechnologies for cancer detection and treatment and introducing a unique nanobomb that can literally blow up breast cancer tumors. |
![]() |
|
The content herein, unless otherwise known to be public domain, are Copyright 1995-2006 - SpaceDaily.AFP and UPI Wire Stories are copyright Agence France-Presse and United Press International. ESA PortalReports are copyright European Space Agency. All NASA sourced material is public domain. Additionalcopyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement,agreement or approval of any opinions, statements or information provided by SpaceDaily on any Web page published or hosted by SpaceDaily. Privacy Statement |