![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() by Molly Porter for MSFC News Huntsville AL (SPX) Jul 10, 2017
ASA has awarded a total of $201,023 to teams of citizen inventors that have reached the latest milestone of NASA's 3D-Printed Habitat Challenge, completing the Phase 2: Level 2 Beam Member competition. The teams are working to find ways to 3-D print habitation structures using recyclables and simulated Martian soil, a technology goal that could support deep space exploration and advance construction capabilities on Earth. For this level, which is the second of three sub-competitions within Phase 2, teams had to 3-D print a beam for bend testing. Scores were calculated based on the material composition and the maximum load of the beam at failure. A seventh team, from Pennsylvania State University of University Park, competed but did not meet the structural strength requirement for a cash award. "Recyclable plastics were used in the top three scoring teams, indicating that a thermoplastic concrete material may be viable for 3-D printing habitats on Mars," said Rob Meuller, senior technologist for advanced projects development at the Swamp Works laboratory at NASA's Kennedy Space Center in Cape Canaveral, Florida, and a subject matter expert for the competition. "Thermoplastics, which are plastic polymers that become moldable when heated, could be obtained from discarded packaging material or even created on Mars using the carbon dioxide atmosphere and hydrogen from water found in the soil. Such concrete materials could also have applications on Earth while using discarded plastic trash." The goal of the challenge is to foster the development of technologies to manufacture a habitat using local indigenous materials with, or without, recyclable materials. The vision is that autonomous machines will someday be deployed in deep space destinations, including Mars, to construct shelters for human habitation. On Earth, these same capabilities could be used to produce affordable housing wherever it is needed or where access to conventional building materials and skills are limited. The 3D-Printed Habitat Challenge is run through a partnership with NASA's Centennial Challenges Program and Bradley University in Peoria, Illinois. Bradley University has partnered with sponsors Caterpillar, Bechtel and Brick and Mortar Ventures to run the competition. "These competitors are working to advance critical systems needed for human space exploration," said Lex Akers, dean of the Caterpillar College of Engineering and Technology at Bradley University. "We are on the edge of developing new, innovative and disruptive ideas that could change our future. This type of work will allow us to explore new ideas as we partner in creating solutions for our world and beyond." The challenge comprises three phases: Phase 1, the Design Competition, was completed in 2015. Phase 2, the Structural Member Competition, has three sub-competitions, carries a $1.1 million prize purse and focuses on the material technologies needed to create structural components. The Phase 3 On-Site Habitat Competition has a $1.5 million prize purse, and will focus on automated 3-D print systems to autonomously construct a complete habitat. Teams will now work toward Phase 2: Level 3, where they will be required to 3-D print a dome structure and provide samples for crush testing. Teams must qualify for this level based on their performance in the previous levels. The event will be open to the public in Peoria on Aug. 25 and 26 through registration. NASA's Centennial Challenges program is part of the agency's Space Technology Mission Directorate, and is managed at NASA's Marshall Space Flight Center in Huntsville, Alabama. NASA invites the public to participate in prize competitions and challenges to drive innovation and enable solutions in aeronautics and space technology focus areas. To register for competition and for official rules and documents, visit here
The winning teams are:
2nd place: Form Forge of Oregon State University, Corvallis - $67,465
3rd place: Foster +Partners | Branch Technology of Chattanooga, Tennessee - $63,783 (earned first place and $85,930 in Phase 2: Level 1)
4th place: University of Alaska of Fairbanks - $35,573 (earned second place and $14,070 in Phase 2: Level 1)
5th place: CTL Group Mars of Skokie, Illinois - $34,202 6th place: ROBOCON of Singapore (International team, not eligible for prize money)
![]() Washington DC (SPX) Jun 28, 2017 Mechanochemistry is a widespread synthesis technique in all areas of chemistry. Various materials have been synthesized by this technique when the classical wet chemistry route is not satisfactory. Characterization of the reaction mixture is however much less accessible than in solutions. Recently, in situ observations of mechanochemical reactions have been achieved by X-ray diffraction an ... read more Related Links 3D-Printed Habitat Challenge Space Technology News - Applications and Research
![]()
![]() |
|
The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us. |